Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > Ricardo Spares

Magneto SparesMagneto Spares

ImageNameDescriptionPriceQty 
Control lever single
Control lever singleControl lever single
unplated used to Advance Magento
£138.00
Control lever twin
Control lever twin £172.50
Crank pin Veteran/H/SD
Crank pin Veteran/H/SD

Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H 

also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand

From: £74.75
Fuel Cap 1 5/8 brass
Fuel Cap 1 5/8 brassFuel Cap 1 5/8 brass stamped Rotherhams Coventry.
Ready to plate.
Bayonet clip on cap.

Spring inside is slightly larger than some originals and can prevent the cap from closing.
Spring can be easily modified to fit. Otherwise it can be loose on repro tanks.
Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.
 
£66.70
Fuel Cap 2" dia Brass
Fuel Cap 2" dia BrassFuel Cap 2" brass stamped Rotherhams Coventry.
Ready to plate.
Bayonet clip on cap.
 


Spring inside is slightly larger than some originals and can prevent the cap from closing.
Spring can be easily modified to fit. Otherwise it can be loose on repro tanks.
Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.
£68.31
Gasket Barrel base
Gasket Barrel base

Paper gasket for the barrel Base

Veteran is 1910 to 1914

Model H,SD, Ricardo

Model P, N,NSD 

£5.75
Gudgeon pin 16mm vintage
Gudgeon pin 16mm vintage

Gudgeon pin 16mm vintage

16mm dia

76mm long

8mm bore

£11.50
Handle bars Model P (Ricardo)
Handle bars Model P (Ricardo)Handle bars Model P 29 inches end to end£44.27
Head gasket Ricardo
Head gasket Ricardo £46.00
Manual 1925 H / SD / R spares
Manual 1925 H / SD / R sparesManual 1925 H / SD / R spares£11.50
Manual 1927 Model SD / R /RI  spares
Manual 1927 Model SD / R /RI sparesManual 1927 Model SD / R /RI  spares£11.50
Nut 1/4 whit
Nut 1/4 whitNut 1/4 whit.
Nut 1/4 whit x 1/4 wide x 1/2 hex
used on seats and other parts of bike.
£2.53
Nut 1/4 x 24 x 1/4 wide
Nut 1/4 x 24 x 1/4 wideNut 1/4 x 24 tpi x1/4 wide 7/16 hex
Magneto stay and model P bolts on crankcase and frame farts
£2.30
Nut 3/8 frame domed head  5/16 wide
Nut 3/8 frame domed head 5/16 wideNut 3/8 x 24 tpi frame domed head  5/16 wide x 600 thou hex
used on veterans also
£3.45
Nut 3/8 x  0.280 wide domed head
Nut 3/8 x 0.280 wide domed headNut 3/8 x 0.280 wide 0.6 thou hex for veteran frame bolts mainly.£3.45
Nut 3/8 x 13/32 wide domed head
Nut 3/8 x 13/32 wide domed headNut 3/8 x 24 tpi x 13/32 wide 0.6 thou hex for some frame bolts£3.45
nut 5/16 whit thin
nut 5/16 whit thin

nut 5/16 whit thin

5/16 whit x 1/4 wide x 0.525 hex

£2.30
Nut 5/16 whit x 0.300 wide for spring clamp bolt
Nut 5/16 whit x 0.300 wide for spring clamp boltNut for front spring clamp bolt 3/8 whit x 0.300 wide 7/16 hex£2.87
Nut 7/16 thread built in washer
Nut 7/16 thread built in washerNut 7/16 x 24tpi thread built in washer used on Junior foot pedal and  in other places£5.75
Nut carrier 3/8 x 24 Tpi x 0.165 wide.
Nut carrier 3/8 x 24 Tpi x 0.165 wide.Nut for carrier bolts 3/8 x 24 Tpi x 0.165 thou wide. 1/2 hex£3.45

Page
« Prev |1|2|3|4|5|6|7| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies