Ricardo Spares

Home > Ricardo Spares

Magneto Spares

Image	Name	Description	Price	Qty
	casting Front stand legs	Front sand lugs bronze	£8.05
	Casting Pedal hanger 2 " centres	1 x Casting Pedal hanger 2 " centres unmachined	£12.65
	Casting Pedal hanger 4 " centres	Casting Pedal hanger 4 " centres unmachined	£12.65
	Casting rear stand swivel	Casting for rear stand swivel one cast lug.	£12.65
	casting rear stay ends No D	casting rear stay ends casting 2 cast needed per rear stays Sold as 1 casting 1 top lug and 1` bottom lug can be used in most model to make the stays from	£13.80
	Casting SD / Ricardo Mudguard	Casting SD / Ricardo Mudguard unmachined	£25.30
	Casting stand arms 1 pair	Casting stand arms set of 2 one 1 L/H and 1 R/H	£57.50
	Casting timing cover outer for oil pump Ricardo	Casting timing cover outer for oil pump on Ricardo	£63.25
	Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot	Chain timing 1/2 x 1/8 sold buy 300mm/ 1 foot SD/Ricardo/H 46 links need 2 feet needed SD/Ricardo Dyno 48 links 3 feet needed Model P 44 link 2 feet needed	£10.92
	Chain 5/8 x 1/4 x 107 links	Chain 5/8 x 1/4. sold buy the box 97 links of Regina comes with one link in the box. final drive and from engine to gearbox also SD/P/N/Q/QA Primary 52 links P/Q/N Rear Chain Solo 89 with a 38 teeth rear side car 92 with a 43 teeth rear	£60.00
	Chain Link 1/2 x 1/8	Chain Link 1/2 x 1/8 1 connector	£5.00
	Chain Link 5/8 x 1/4 - 1/2 link	Chain Link 5/8 x 1/4 - 1/2 link used when you need a odd roller	£5.00
	Chain Link 5/8 x 3/8 - 1/2 link	Chain Link 5/8 x 3/8 - 1/2 link used when you need a odd roller	£5.00
	Clutch plate outer SD/Ricardo sliver	Harden and tempered spring steel clutch plates nitrogen cut out of 0.8 spring steel price per Plate	£18.40
	Clutch Plate SD and Ricardo Bronze inter	phosphor bronze sheet water jet cut to the same sizes inter plate	£28.00
	Control lever twin	Control lever twin unplated used to control Carburetor	£172.50
	Crank pin Veteran/H/SD	Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand	From: £74.75
	Gasket Barrel base	Paper gasket for the barrel Base Veteran is 1910 to 1914 Model H,SD, Ricardo Model P, N,NSD	£5.75
	Gudgeon pin 16mm vintage	Gudgeon pin 16mm vintage 16mm dia 76mm long 8mm bore	£11.50
	Handle bars Model P (Ricardo)	Handle bars Model P 29 inches end to end	£44.27

Page
« Prev |1|2|3|4|5|6| Next »