Other Models - Page 6

Home > Other Models

Magneto Spares

Image	Name	Description	Price	Qty
	Spring model P/N shock absorber	Spring model P/N/NSD/Q shock absorber or cush drive part no 6043 in 1926 manual	£12.65
	Spring N deluxe oil pedal lever	Spring N deluxe oil pedal lever to return pedal back up fits NSD also	£7.47
	spring rear brake 3/8 fits Model H/ Sd Baby and others.	Brake spring fits Model H / Sd Baby and others 3/8 inch between the mounting plates. stops shoe rubbing.on belt rim.	£12.47
	Spring Rear stand carrier clip Model P & N	Spring Rear stand carrier clip Model P and N. may also fit Q and QA	£43.70
	Spring TT Kickstarter	Kickstart spring for TT also some late 30's models.	£8.34
	Spring Valves Model W	Valve spring set Model W. 30mm od x 50.8 long. set of 2.	£20.70
	Springs for Model P valve spring 1LH / 1RH	Model P valve spring set one L/H and One R/H 1 1/4 X 2 1/2	£20.70
	Sprocket Magneto 13 tooth	Sprocket Magneto 13 tooth 1/2 x 1/8 pitch. Captive nut has pilot bore must be tapped to suit you magneto as their is a lot of different threads. Suit Babys with a Bosch ZA1 or variant with a 1 in 5 taper and around 0.450 on the large size of the taper.Once nut is machined pein over screw threads.	£80.00
	Sturmey Archer CS gearbox lever	Sturmey Archer CS gearbox lever Nickel Plated The one with the black Knob no engraving is Triumph The one with the plain wooden knob and hand engraved is Norton and other motorbikes.	From: £200.00
	Tank Knee pads	Tank knee pads that add that extra touch to you bike. sold as a pair with leather lace to strap on to machine 150 wide 1980 across the eyelet side oval 115 x 80 x 20mm high approximately	£80.00
	Timing Cover Model P/N/PN/Q/QA	Timing cover Model P/N/PN/Q/QA This is a Cast item then its is very slowly hand finished off .	£80.00
	Transfer Headstock P etc	Transfer Headstock P etc used on fron of headstock P and later.	£6.90
	Transfer Tank 15-28	Transfer Tanks and headstock 15-28. 2 needed	£6.50
	Valve copper washer Model H / SD / P and N's	Valve copper washer Model H / SD / P and N's	£3.16
	Valve lifter cable Model P	Valve lifter cable Model P - Fully assembled with adjuster and nipples. 4.5 ft in length Will fit Model N ,Q,QA and early NSD	£22.00
	washer	steel washer hand machined not pressed out	£0.50

Page
« Prev |1|2|3|4|5|6| Next »