Other Models - Page 3

Home > Other Models

Image	Name	Description	Price	Qty
	Bearing 1178X/1120NI 5/8 bore wheel bearing		£42.00
	bearing gearbox 1 1/8 x 2 1/8 x 3/8 wide deep grove bearing		£14.50
	Belt Dressing (Aerosol can)(UK ONLY)	Pick up at show only as postage restriction apply Used to reduce slip in belts. no overseas postage	£6.50
	Bolt and nut Model P/N etc Sprocket	Model P/N etc Bolt and nut to hold or rear sprocket .	£7.80
	Brooks B170 Seat Complete and Assembled	A leather brooks seat, new and manufactured with our own thicker seat clamps. Badge, springs and pan included as in picture. Be wary of quarantine limitations such as Australian import restrictions with the leather.	£400.00
	Carburetor drain cap twin barrel	Carburetor drain cap twin barrel H etc	£7.00
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£5.50
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£7.00
	Carburettor top twin barrel carb	Carburettor screw on slide top.Suit twin barrle carb with both the tops the same size thread. Model H and later not Baby triumph.	£21.00
	Carburettor Float twin barrel carbs	Float Vintage twin barrel Carburettor Brand new carb float to fit float bowls with the needle that seals in the top screw on cap. Will fit model H,SD,P,PN,N,NSD etc	£47.00
	Carburettor fuel nipple	Carburettor fuel nipple to fit the 3/16 copper pipe into.	£5.50
	Carburettor bolt gasket	Carburettor bolt gasket petrol resistant material	£1.25
	Carburettor fuel bowl gasket	Carburettor fuel bowl gasket petrol residence Material some of the early bowls need a small amount taking of OD I do it on the grinder on the od	£2.00
	casting Front stand legs	Front sand lugs bronze	£7.00
	Casting Model P Exhaust	Casting Model P/N,Q Exhaust Hanger	£12.00
	Casting timing cover outer for oil pump	Casting timing cover outer for oil pump	£50.00
	Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot	Chain timing 1/2 x 1/8 sold buy 300mm/ 1 foot SD/Ricardo/H 46 links need 2 feet needed SD/Ricardo Dyno 48 links 3 feet needed Model P 44 link 2 feet needed	£12.00
	Chain 5/8 x 1/4 x 97 links	Chain 5/8 x 1/4. sold buy the box 97 links of Regina comes with one link in the box. final drive and from engine to gearbox also SD/P/N/Q/QA Primary 52 links P/Q/N Rear Chain Solo 89 with a 38 teeth rear side car 92 with a 43 teeth rear	£47.00
	Chain Guard Model nsd		£105.00
	Chain Link 1/2 x 1/8	Chain Link 1/2 x 1/8 1 connector	£4.00

Page
« Prev |1|2|3|4|5|6|7| Next »