Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > New Products

Magneto SparesMagneto Spares

ImageNameDescriptionPriceQty 
Spring Model P/N and later Kickstarter Ratchet sleeve spring
Spring Model P/N and later Kickstarter Ratchet sleeve springSpring Model P/N and later Kickstarter Ratchet sleeve spring£6.32
Spring model P/N shock absorber
Spring model P/N shock absorberSpring model P/N/NSD/Q shock absorber or cush drive

part no 6043 in 1926 manual
£12.65
Spring Pedal Oiler Cover 9/16 ID
Spring Pedal Oiler Cover 9/16 IDSpring Pedal Oiler Cover 9/16 ID£4.60
Spring Rear stand carrier clip Model P & N
Spring Rear stand carrier clip Model P & NSpring Rear stand carrier clip Model P and N.

may also fit Q and QA
£43.70
Sprocket 15 tooth gearbox Model P
Sprocket 15 tooth gearbox Model P £69.00
Sprocket Magneto 13 tooth
Sprocket Magneto 13 toothSprocket Magneto 13 tooth 1/2 x 1/8 pitch.
Captive nut has pilot bore must be tapped to suit you magneto as their is a lot of different threads.
Suit Babys with a Bosch ZA1 or variant   with a 1 in 5 taper and around 0.450 on the large size of the taper.Once nut is machined pein over screw threads.
£88.55
Sprocket Model P Rear Sprocket (38 Tooth)
Sprocket Model P Rear Sprocket (38 Tooth)Sprocket Model P Rear Sprocket (38 Tooth)

Suitable for N but ive been told needs 1/8th taken from bore.
£74.75
Sprocket SD Rear (43 tooth)
Sprocket SD Rear (43 tooth)Sprocket SD Rear (43 tooth)£97.75
Tank Knee pads
Tank Knee pads

Tank knee pads that add that extra touch to you bike.

sold as a pair with leather lace to strap on to machine

150 wide 1980 across the eyelet side

oval 115 x 80 x 20mm high approximately 

£80.00
tax disc holder
tax disc holderchrome tax disc holder£7.47
Thackeray Washer
Thackeray WasherThackeray washer new old stock washers 7/16 and 1/2 bore£1.15
Timing Cover Model P/N/PN/Q/QA
Timing Cover Model P/N/PN/Q/QA

Timing cover Model P/N/PN/Q/QA

This is a Cast item then its is very slowly hand finished off .

£100.00
Tool Box Trays steel
Tool Box Trays steel1913/14 tools box trays made as close to the originals with belt rim guard.£70.00
Valve lifter cable Model P
Valve lifter cable Model PValve lifter cable Model P - Fully assembled with adjuster and nipples. 4.5 ft in length

Will fit Model N ,Q,QA and early NSD
£22.00
Valve Ricardo exhaust
Valve Ricardo exhaust £57.50
Valve Ricardo inlet
Valve Ricardo inlet £57.50
Veteran Rear Stand Clip
Veteran Rear Stand ClipVeteran Rear Stand Clip bolt brazed in, made of spring steel.

Spring and Dog bone clip sold separately
£50.60
Veteran Valve exhaust lift linkage
Veteran Valve exhaust lift linkageVeteran exhaust lift linkage part that pins to the bronze lever on the timing cover£12.65
washer
washersteel washer hand machined not pressed out£0.57
Westwood Rim 24inch x 2 1/4 x 40 holes
Westwood Rim 24inch x 2 1/4 x 40 holesWestwood Rim 24inch x 2 1/4 x 40 holes
520mm od x 51mm across rim
I have a limited amount or new old stock rims witch are over 30 years old 2mm section and pre drilled 
some are painted in black some are plain metal and some have light rust ( no pitting will polish up fine for nickling or painting)
£74.75

Page
« Prev |1|2|3|4|5| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies