New Products - Page 2

Home > New Products

Image	Name	Description	Price	Qty
	Carburettor Float twin barrel carbs	Float Vintage twin barrel Carburettor Brand new carb float to fit float bowls with the needle that seals in the top screw on cap. Will fit model H,SD,P,PN,N,NSD etc	£47.00
	Carburettor Float Veteran carbs	Carburettor Float Veteran carbs Brand new carb float to fit float bowls with the bob weights that move the needle onto its seat.	£47.00
	Carburettor bolt gasket	Carburettor bolt gasket petrol resistant material	£1.25
	Carburettor fuel bowl gasket	Carburettor fuel bowl gasket petrol residence Material some of the early bowls need a small amount taking of OD I do it on the grinder on the od	£2.00
	Casting Brooks seat badge	Bronze Lost wax seat seat badge need runner dressing off before plating	£11.00
	Casting CS gearbox Clutch Arm	Bronze casting Need Machining for your application	£12.00
	Casting Exhaust veteran end		£60.00
	Casting for clutch hub	Casting for clutch hub models	£25.00
	Casting Fork Lamp bracket	Casting for Fork Lamp bracket investment cast in nickel bronze	£12.00
	casting Front stand legs	Front sand lugs bronze	£7.00
	Casting Model H timing cover 2 pieces	Casting Model H timing cover, Aluminium Cast, needs machining inter and outer	£120.00
	Casting timing cover outer for oil pump	Casting timing cover outer for oil pump	£50.00
	Casting Veteran brake pedal	Casting Veteran brake pedal 1908 to approx 1910	£20.00
	Casting Veteran control lever for tank	Lost wax bronze casting for magneto and Carb controls need maching for your applaction 1 Arm	£12.00
	Casting Veteran exhaust pipe side	Casting Veteran exhaust pipe side investment cast in steel very good copy needs machining	£65.00
	casting Veteran magneto platform	Veteran magneto platform casting part of the exhaust box 1 of 3 castings	£30.00
	Champion Spark Plug 6 COM	Champion Spark Plug 6 COM new old stock once their gone their gone I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7	£14.00
	Clutch Cable Model P	Clutch Cable Model P - fully assembled with adjuster and nipple. 4.5 ft in length Will fit model N ,Q, QA and early NSD	£15.00
	Clutch Friction Plate Model CO-CSD and Later	New clutch Plates laser cut from modern material 143mm OD 111mm ID x 2.5mm Thick	£15.00
	Clutch Friction Plate Model H and Sturmey Archer CS gear Box		£12.50

Page
« Prev |1|2|3|4| Next »