Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > Model SD Spares

Magneto spares

ImageNameDescriptionPriceQty 
Nut crank pin 5/8
Nut crank pin 5/8Nut crank pin 5/8 x 1/4 wide x 0.940 hex£4.00
Nut crankcase 1/4 blind hole
Nut crankcase 1/4 blind holeNut crankcase 1/4 x24 tpi blind hole

Used on veteran and vintage cases and other parts of the bike
£4.50
Nut exhaust ring Model H and SD
Nut exhaust ring Model H and SDNut exhaust ring£35.00
Nut SD/Ricardo Clutch nut
Nut SD/Ricardo Clutch nutNut SD/Ricardo Clutch nut£20.00
nut seat bolt 3/8 whit vintage
nut seat bolt 3/8 whit vintagenut for seat bolt 3/8 whit vintage£6.00
Nut veteran frame bolt 9/16 thread
Nut veteran frame bolt 9/16 threadNut for veteran frame bolt 9/16 thread built in washer£6.88
Oiler cover Triumph large
Oiler cover Triumph largeVeteran Oiler Triumph
1 3/8 on centres
spring steel with ball and engraved Triumph
£9.00
Oval Tubing 2 x 0.5m Rear Stand Tube
Oval Tubing 2 x 0.5m Rear Stand Tube5/8 x 1 1/8  oval  with 2mm wall thickness.

This listing is for 2 of 0.5m lengths

used for rear stands in most triumph motorbikes

Due to length of the tube, postage is too high to regularly send 1m lengths, especially abroad. We will now sell by default the tubing already cut in two. If you wish to have an uncut 1m, please contact us and we can arrange additional postage
£22.00
Piston Model H/SD
Piston Model H/SDModel H/SD piston 
standard plus 20 ,30 and 40 thou
£270.00
Piston rings 85 x 6 set (2)
Piston rings 85 x 6 set (2)Piston rings 85 set.
85 mm x 6 x 3 set of 2
£22.00
Piston rings 85.5 x 6 set (2)
Piston rings 85.5 x 6 set (2)Piston rings 85.5 set.
85.5 mm x 6 x 3 set of 2
£22.00
Roller Bigend 3/16 x 7/8 radius ends
Roller Bigend 3/16 x 7/8 radius ends

Big end Rollers 3/16 x 7/8 radius ends to be used in model H cranks up to 1919

18 rollers needed they will need to be ground down to 19.90-19.95 long to fit in the big end

THE EARLY CRANK HAS DOUBLE ENDED CRANK PIN AND NO BEARING CAGE AND IS 20MM WIDE ACRASS THE FACE.

£2.50
Rollers for bigend 7/32 x 7/16
Rollers for bigend 7/32 x 7/16

Rollers for bigend 7/32 x 7/16 all have been hand made and ground as no longer made

standard

plus 0.0005 thou

plus 0.001 thou

plus 0.0015 thou

plus 0.002 thou

plus 0.0025 thou

plus 0.004 thou

£2.50
Rubber Foot pedals D type
Rubber Foot pedals D type

Rubber Foot pedals D type Triumph on top

sold as a pair

£35.00
Rubber Grips 7/8 bars 5 1/4" long
Rubber Grips 7/8 bars 5 1/4" long £36.00
Rubber kickstart
Rubber kickstart £5.50
Spark plug Terminal
Spark plug TerminalSpark plug Terminal made from Brass£2.00
Spark plug wire black
Spark plug wire blackSpark plug wire black sold buy the meter£5.50
Spark plug wire red Braid
Spark plug wire red Braid £6.50
Spark plug wire yellow Braid
Spark plug wire yellow BraidSpark plug wire yellow Braid sold buy the metre£6.60

Page
« Prev |1|2|3|4|5|6|7| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies