Model SD Spares

Home > Model SD Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Chain Link 5/8 x 1/4 - 1/2 link	Chain Link 5/8 x 1/4 - 1/2 link used when you need a odd roller	£5.17
	Champion Spark Plug 6 COM	Champion Spark Plug 6 COM new old stock once their gone their gone I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7	£18.97
	Clutch plate outer SD/Ricardo sliver	Harden and tempered spring steel clutch plates nitrogen cut out of 0.8 spring steel price per Plate	£18.40
	Clutch Plate SD and Ricardo Bronze inter	phosphor bronze sheet water jet cut to the same sizes inter plate	£28.00
	Control lever single	Control lever single unplated used to Advance Magento	£138.00
	Control lever twin		£172.50
	Crank pin Veteran/H/SD	Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand	From: £74.75
	Front Brake Stirrup Bracket L and R	Front Brake Stirrup Bracket L and R. 1 pair	£50.00
	Front stand hoop	Front stand hoop fits SD , Ricardo's , P and N models	£74.75
	Fuel Cap 1 5/8 brass	Fuel Cap 1 5/8 brass stamped Rotherhams Coventry. Ready to plate. Bayonet clip on cap. Spring inside is slightly larger than some originals and can prevent the cap from closing. Spring can be easily modified to fit. Otherwise it can be loose on repro tanks. Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.	£66.70
	Fuel Cap 2" dia Brass	Fuel Cap 2" brass stamped Rotherhams Coventry. Ready to plate. Bayonet clip on cap. Spring inside is slightly larger than some originals and can prevent the cap from closing. Spring can be easily modified to fit. Otherwise it can be loose on repro tanks. Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.	£68.31
	Fuel tank pump tube	15/16 bore x 1 inch od x 141mm long	£40.00
	Gasket Barrel base	Paper gasket for the barrel Base Veteran is 1910 to 1914 Model H,SD, Ricardo Model P, N,NSD	£5.75
	Gudgeon pin 16mm vintage	Gudgeon pin 16mm vintage 16mm dia 76mm long 8mm bore	£11.50
	Manual 1925 H / SD / R spares	Manual 1925 H / SD / R spares	£11.50
	Manual 1927 Model SD / R /RI spares	Manual 1927 Model SD / R /RI spares	£11.50
	Nut 1/4 whit	Nut 1/4 whit. Nut 1/4 whit x 1/4 wide x 1/2 hex used on seats and other parts of bike.	£2.53
	Nut 1/4 x 24 x 1/4 wide	Nut 1/4 x 24 tpi x1/4 wide 7/16 hex Magneto stay and model P bolts on crankcase and frame farts	£2.30
	Nut 3/8 frame domed head 5/16 wide	Nut 3/8 x 24 tpi frame domed head 5/16 wide x 600 thou hex used on veterans also	£3.45
	Nut 3/8 x 0.280 wide domed head	Nut 3/8 x 0.280 wide 0.6 thou hex for veteran frame bolts mainly.	£3.45

Page
« Prev |1|2|3|4|5|6|7|8| Next »