Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > Model SD Spares


ImageNameDescriptionPriceQty 
Bolt fork Pivot to spring
Bolt fork Pivot to springFork Pivot bolt that clamps to the spring housing
5/16  x 30 tpi special thread

Thread to under side of head.
£5.25
Bolt Vintage Seat model H
Bolt Vintage Seat model HVintage Seat Bolt Domed head 3/8 whit x 4.100 long model H.

does fir some other Model please check like early SD/Ricardo's and late Veterans
£9.85
Brake Block 88
Brake Block 88New brake blocks used on Model H and SD plus can be modified to be used on Model P also.

They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)
£50.00
Brake Block front shoe
Brake Block front shoeNew Brake block material 75mm x 25 mm x10mm thick to make front stirrup brake pads

Sold as one shoe

Total of 2 needed for a front brake £48.00 in total

They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)
£24.00
Cable Nipple 976/1 5 off
Cable Nipple 976/1 5 off

1/4 dia x 1/8 wide used on the model P/N and later Levers

Pack off 5

£2.00
Carburetor fuel nut
Carburetor fuel nutCarburetor fuel nut
9/16 X 25Tpi
Brass hex.
£5.50
Carburetor needle
Carburetor needle

Carburettor needle

72.5mm suits early Model H
78.6 mm suits P and later
85mm long machine to what you need
check your size as there has been some carbs that need longer Needles and are from the wrong model also

you must set your float level one this is installed

£7.00
Carburettor Float twin barrel carbs
Carburettor Float twin barrel carbsFloat Vintage twin barrel Carburettor
Brand new carb float to fit float bowls with the needle that seals in the top screw on cap.
Will fit model H,SD,P,PN,N,NSD etc
 
£47.00
Carburettor bolt gasket
Carburettor bolt gasketCarburettor bolt gasket petrol resistant material£1.25
Carburettor fuel bowl gasket
Carburettor fuel bowl gasketCarburettor fuel bowl gasket petrol residence Material
some of the early bowls need a small amount taking of OD

I do it on the grinder on the od
£2.00
casting Front stand legs
casting Front stand legsFront sand lugs bronze£7.00
Casting Pedal hanger 2 " centres
Casting Pedal hanger 2 " centres1 x Casting Pedal hanger 2 " centres unmachined£10.00
Casting Pedal hanger 4 " centres
Casting Pedal hanger 4 " centres £10.00
Casting rear stand swivel
Casting rear stand swivelCasting for rear stand swivel one cast lug.£10.00
Casting SD / Ricardo Mudguard
Casting SD / Ricardo MudguardCasting SD / Ricardo Mudguard unmachined£20.00
Casting stand arms 1 pair
Casting stand arms 1 pairCasting stand arms set of 2 one  1 L/H and 1 R/H£45.00
Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot
Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 footChain timing 1/2 x 1/8
sold buy 300mm/ 1 foot
SD/Ricardo/H 46 links need  2 feet needed
SD/Ricardo Dyno 48 links 3 feet needed
Model P 44 link 2 feet needed
£12.00
Chain 5/8 x 1/4 x 107 links
Chain 5/8 x 1/4 x 107 linksChain 5/8 x 1/4.
sold buy the box
97 links of Regina comes with one link in the box.
final drive and from engine to gearbox also

SD/P/N/Q/QA Primary 52 links

P/Q/N Rear Chain 
Solo 89 with a 38 teeth rear
side car 92 with a 43 teeth rear
£47.00
Chain 5/8 x 3/8 x 101 links
Chain 5/8 x 3/8 x 101 linksChain 5/8 x 3/8
Used on model H Primary and SD and Ricardo rear chains.
Sold buy the box only 101 links of Regina comes with one link in the box.

H 52 link primary
Sd rear 92 Links
£47.00
Chain case inspection cover
Chain case inspection coverChain case inspection cover on primary cover used on Sd and Ricardos£20.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies