Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > Model SD Spares

Magneto spares

ImageNameDescriptionPriceQty 
Spring  SD/Ricardo Kickstarter
Spring SD/Ricardo KickstarterSpring for SD/Ricardo Kickstarter gearbox

 
£10.00
Spring front brake stirrup
Spring front brake stirrupSpring for Front brake stirrup assembly£2.00
Spring H & Sd Valve set of 2
Spring H & Sd Valve set of 2

Valve spring set for Model H,SD 33.5 dia x 71 long, set of 2.

Nickel plated

£16.00
Spring P / SD / Ricardo Forks 1LH / 1 RH
Spring P / SD / Ricardo Forks 1LH / 1 RH £18.00
Spring carburettor throttle set of 2
Spring carburettor throttle set of 2Carburettor throttle spring set OF 2 springs 3/4 dia X 3 3/8 fit model H and later carbs with the same size springs.

 
£8.00
Spring for Model H,SD brake pedal
Spring for Model H,SD brake pedalModel H,SD brake pedal spring spring£7.00
Casting Number plate bracket
Casting Number plate bracket

Bronze casting unmachined

£16.00
Bolt Vintage Seat model H
Bolt Vintage Seat model HVintage Seat Bolt Domed head 3/8 whit x 4.100 long model H.

does fir some other Model please check like early SD/Ricardo's and late Veterans
£11.00
Brake Block 88
Brake Block 88New brake blocks used on Model H and SD plus can be modified to be used on Model P also.

They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)
£50.00
Brake Block front shoe
Brake Block front shoeNew Brake block material 75mm x 25 mm x10mm thick to make front stirrup brake pads

Sold as one shoe

Total of 2 needed for a front brake £48.00 in total

They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)
£26.40
Cable Nipple 976/1 5 off
Cable Nipple 976/1 5 off

1/4 dia x 1/8 wide used on the model P/N and later Levers

Pack off 5

£2.20
Carburetor needle
Carburetor needle

Carburettor needle

72.5mm suits early Model H
78.6 mm suits P and later
85mm long machine to what you need
check your size as there has been some carbs that need longer Needles and are from the wrong model also

you must set your float level one this is installed

From: £7.50
Carburettor Float twin barrel carbs
Carburettor Float twin barrel carbsFloat Vintage twin barrel Carburettor
Brand new carb float to fit float bowls with the needle that seals in the top screw on cap.
Will fit model H,SD,P,PN,N,NSD etc
 
£50.00
Carburettor fuel nipple
Carburettor fuel nippleCarburettor fuel nipple to fit the 3/16 copper pipe into.£6.00
Carburettor bolt gasket
Carburettor bolt gasketCarburettor bolt gasket petrol resistant material£1.25
Carburettor fuel bowl gasket
Carburettor fuel bowl gasketCarburettor fuel bowl gasket petrol residence Material
some of the early bowls need a small amount taking of OD

I do it on the grinder on the od
£2.00
casting Front stand legs
casting Front stand legsFront sand lugs bronze£7.00
Casting Lobster Tail lower Bracket
Casting Lobster Tail lower Bracket

Casting Lobster Tail lower Bracket

1914 and Model H than early SD

£20.00
Casting Model SD Exhaust
Casting Model SD ExhaustCasting Model SD Exhaust£14.00
Casting Model SD Foot brake
Casting Model SD Foot brakeCasting Model SD Foot brake£20.00

Page
« Prev |1|2|3|4|5|6|7| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies