Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > Model P Spares


ImageNameDescriptionPriceQty 
Spring model P/N shock absorber
Spring model P/N shock absorberSpring model P/N/NSD/Q shock absorber

part no 6043 in 1926 manual
£10.00
Spring Rear stand carrier clip Model P & N
Spring Rear stand carrier clip Model P & NSpring Rear stand carrier clip Model P and N.

may also fit Q and QA
£35.00
Springs for Model P valve spring 1LH / 1RH
Springs for Model P valve spring 1LH / 1RHModel P valve spring set one L/H and One R/H
1 1/4 X 2 1/2
£16.00
Sprocket 15 tooth gearbox Model P
Sprocket 15 tooth gearbox Model P £55.00
Sprocket 16 tooth gearbox Model P
Sprocket 16 tooth gearbox Model PSprocket 16 tooth gearbox Model P and N
This is a Tight Fit and may need some adjustment to fit.
brings in up 5 to 8 mile top on top speed I made them for the Cannonball Run to increase My top speed.
£65.00
Sprocket Magneteo 14 tooth
Sprocket Magneteo 14 toothSprocket Magneto 14 tooth 1/2 x 1/8 pitch.
Captive nut has pilot bore must be tapped to suit you magneto as their is a lot of different threads.
Suit Veteran and H/SD etc with a Bosch ZE1 or variant   with a 1 in 5 taper and around 0.520 on the large size of the taper.Once nut is machined pein over screw threads.
£70.00
Sprocket Model P Rear Sprocket (38 Tooth)
Sprocket Model P Rear Sprocket (38 Tooth)Sprocket Model P Rear Sprocket (38 Tooth)

Suitable for N but ive been told needs 1/8th taken from bore.
£60.00
Thackeray Washer
Thackeray WasherThackeray washer new old stock washers£1.00
Toolboxes Model P Brooks
Toolboxes Model P BrooksToolboxes Model P Brooks.
One rear mounted toolbox with leather strap.
£100.00
Transfer Headstock P etc
Transfer Headstock P etcTransfer Headstock P etc
used on fron of headstock P and later.
£4.50
Transfer Tank 15-28
Transfer Tank 15-28 £4.85
Valve cap Model P and Later plain
Valve cap Model P and Later plainModel P and Later Valve cap Plain. made from Brass
1 3/4 thread 16Tpi x 3/4 long Thread
£38.00
Valve Cap Model P and Later spark plug thread
Valve Cap Model P and Later spark plug threadModel P and Later Valve cap spark plug thread.Made from Brass
1 3/4 od thread 16 Tpi x3/4 long thread
M18 x 1.5 spark plug
£40.00
Valve copper washer Model H / SD / P and N's
Valve copper washer Model H / SD / P and N'sValve copper washer Model H / SD / P and N's
 
£2.50
Valve Cotter Model P and later
Valve Cotter Model P and laterValve Cotter Model P and later 100 thou thick£1.00
Valve lifter cable Model P
Valve lifter cable Model PValve lifter cable Model P - Fully assembled with adjuster and nipples. 4.5 ft in length

Will fit Model N ,Q,QA and early NSD
£12.50
Valve model P and later
Valve model P and later £50.00
Valve Wooden Holder
Valve Wooden HolderWooden Valve Holder to protect valve when stored to your tool box£8.50

Page
« Prev |1|2|3|4|5|6| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies