Model P Spares

Home > Model P Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Rollers for bigend 7/32 x 7/16	Rollers for bigend 7/32 x 7/16 all have been hand made and ground as no longer made standard plus 0.0005 thou plus 0.001 thou plus 0.0015 thou plus 0.002 thou plus 0.0025 thou plus 0.004 thou	£2.50
	Rubber Foot pedals Round type P etc	Rubber Foot pedals Round type P etc. Triumph cast in top. sold as a pair	£40.25
	Rubber Grips 7/8 bars 5 1/4" long	Rubber Grips 7/8 bars 5 1/4" long	£41.40
	Rubber kickstart	Rubber kickstart with 5/8 bore	£6.50
	Spark plug Terminal	Spark plug Terminal made from Brass	£2.50
	Spark plug wire black	Spark plug wire black sold buy the meter	£6.00
	Spark plug wire red Braid	Spark plug wire yellow Braid sold buy the metre	£7.50
	Spring Fuel cap stainless	Spring Fuel cap stainless 27/64 x 1 long Stainless	£2.30
	Spring Model P clutch set of 6	Spring Model P clutch set of 6 zinc plated Will also fit model N and NSD and most off the C series also 14.6mm od x 31mm long	£23.00
	Spring Model P Kickstart	Spring for Model P Kickstart	£9.20
	Spring Model P/N and later Kickstarter Ratchet sleeve spring	Spring Model P/N and later Kickstarter Ratchet sleeve spring	£6.50
	Spring model P/N shock absorber	Spring model P/N/NSD/Q shock absorber or cush drive part no 6043 in 1926 manual	£12.65
	Spring Rear stand carrier clip Model P & N	Spring Rear stand carrier clip Model P and N. may also fit Q and QA	£43.70
	Springs for Model P valve spring 1LH / 1RH	Model P valve spring set one L/H and One R/H 1 1/4 X 2 1/2	£20.70
	Sprocket Model P Rear Sprocket (38 Tooth)	Sprocket Model P Rear Sprocket (38 Tooth) Suitable for N but ive been told needs 1/8th taken from bore.	£75.00
	Tank Knee pads	Tank knee pads that add that extra touch to you bike. sold as a pair with leather lace to strap on to machine 150 wide 1980 across the eyelet side oval 115 x 80 x 20mm high approximately	£80.00
	Thackeray Washer	Thackeray washer new old stock washers 7/16 and 1/2 bore	£1.00
	Timing Cover Model P/N/PN/Q/QA	Timing cover Model P/N/PN/Q/QA This is a Cast item then its is very slowly hand finished off .	£80.00
	Transfer Tank 15-28	Transfer Tanks and headstock 15-28. 2 needed	£6.50
	Valve copper washer Model H / SD / P and N's	Valve copper washer Model H / SD / P and N's	£3.16

Page
« Prev |1|2|3|4|5|6| Next »