Model P Spares

Home > Model P Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Cable nipples 2451 5 off	Cable nipples 2451 bag of 5. 190 thou on big end then 140 thou dia 300 thou long 72 thou hole used on inverted levers	£3.00
	Cable No0 control	Control cable No 0 0.050 dia inter. 5 meters of inter and outer in a bag.	£16.00
	Cable No1 control	Cable No1 control 0.062 dia inter. 5 metres of inter and outer.	£17.00
	Cable No2 control	Control cable No2 0.075 dia inter. 5 metres of inter and outer.	£18.00
	Cable No3 control	Control cable No3 0.085 dia inter 5 metres of inter and outer	£20.00
	Spring P / SD / Ricardo Forks 1LH / 1 RH	P / SD / Ricardo Fork springs. Fits web forks also. 116mm long approx tapered 48mm to 39m sold in a pair one left one right.	£20.70
	Spring P/N and other for Rear Brake 1/2	Brake spring fits Model P N and others. 1/2 inch between the mounting plates. stops shoe rubbing.on belt rim.	£13.80
	Spring carburettor throttle set of 2	Carburettor throttle spring set OF 2 springs 3/4 dia X 3 3/8 fit model H and later carbs with the same size springs.	£9.20
	Spring Model P Brake pedal	Model P Brake pedal spring	£6.50
	Battery box Lucas	Lucas battery box made to the same quality as the originals one but from tin plate to stop them rusting out! Limited run of them.	£300.00
	bearing P/N gearbox	Gearbox bearing 1 1/8 x 2 1/8 x 3/8 wide deep grove bearing 2 need in P / N gearbox	£18.50
	Bolt and nut Model P/N etc Sprocket	Model P/N etc Bolt and nut to hold or rear sprocket .	£7.47
	Brake Block 88	New brake blocks used on Model H and SD plus can be modified to be used on Model P also. They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)	£57.50
	Brake plate insert Model P	Model P Brake plate insert laser cut than pressed to form offset and spot welded together.	£18.40
	Brooks seat clamp 1 1/8 inch	Brooks seat clamp 1 1/8 inch bore to suit model P slots 25mm wide	£57.50
	Cable carburettor no0	Carburettor cable no0 Over 130cm long on outer so cut to suit your application will fit veteran carbs and all the Vintage twin barrel carbs up to 1928 made of no 0 cable	£17.00
	Cable Nipple 976/1 5 off	1/4 dia x 1/8 wide used on the model P/N and later Levers Pack off 5	£3.00
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£9.00
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£8.50
	Carburettor drain cap twin barrel	Carburetor drain cap twin barrel H etc	£13.00

Page
« Prev |1|2|3|4|5|6| Next »