Model N Spares

Home > Model N Spares

Image	Name	Description	Price	Qty
	Primary cover P/N and later	Hand made to fit P and N will fit most model up to early NSD	£330.00
	Rollers for bigend 7/32 x 7/16	Rollers for bigend 7/32 x 7/16 all have been hand made and ground as no longer made standard plus 0.0005 thou plus 0.001 thou plus 0.0015 thou plus 0.002 thou plus 0.0025 thou plus 0.004 thou	£2.91
	Rubber Foot pedals Round type P etc		£38.50
	Rubber Grips 7/8 bars 5 1/4" long		£38.50
	Rubber kickstart		£5.50
	Rubber knee pads for tanks	Rubber knee pads for tanks sold as a pair	£51.70
	Spark plug Terminal	Spark plug Terminal made from Brass	£1.65
	Spark plug wire black	Spark plug wire black sold buy the meter	£5.50
	Spark plug wire red Braid		£6.60
	Spark plug wire yellow Braid	Spark plug wire yellow Braid sold buy the metre	£6.60
	Spring for Model P Kickstart	Spring for Model P Kickstart	£7.70
	Spring Fuel cap stainless	Spring Fuel cap stainless 27/64 x 1 long Stainless	£1.65
	Spring Model P clutch set of 6	Spring Model P clutch set of 6 zinc plated	£19.80
	Spring Model P/N and later Kickstarter Ratchet sleeve spring	Spring Model P/N and later Kickstarter Ratchet sleeve spring	£5.78
	Spring model P/N shock absorber	Spring model P/N/NSD/Q shock absorber part no 6043 in 1926 manual	£11.00
	Spring Rear stand carrier clip Model P & N	Spring Rear stand carrier clip Model P and N. may also fit Q and QA	£38.50
	Springs for Model P valve spring 1LH / 1RH	Model P valve spring set one L/H and One R/H 1 1/4 X 2 1/2	£17.60
	Sprocket 15 tooth gearbox Model P		£60.50
	Sprocket 16 tooth gearbox Model P	Sprocket 16 tooth gearbox Model P and N This is a Tight Fit and may need some adjustment to fit. brings in up 5 to 8 mile top on top speed I made them for the Cannonball Run to increase My top speed.	£71.50
	Sprocket Magneteo 14 tooth	Sprocket Magneto 14 tooth 1/2 x 1/8 pitch. Captive nut has pilot bore must be tapped to suit you magneto as their is a lot of different threads. Suit Veteran and H/SD etc with a Bosch ZE1 or variant with a 1 in 5 taper and around 0.520 on the large size of the taper.Once nut is machined pein over screw threads.	£77.00

Page
« Prev |1|2|3|4|5|6| Next »