Model N Spares

Home > Model N Spares

Image	Name	Description	Price	Qty
	Exhaust Model P		£190.00
	Fuel Cap 2" dia Brass	Fuel Cap 2" brass stamped Rotherhams Coventry. Ready to plate. Bayonet clip on cap. Spring inside is slightly larger than some originals and can prevent the cap from closing. Spring can be easily modified to fit. Otherwise it can be loose on repro tanks. Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.	£54.00
	Handle bars Model N	Handle bars Model N 7/8 bars like P with a 1 Inch collar in middle	£0.00
	Manual Model N and QA spares	Manual Model N and QA spares	£8.50
	Model P/N/Q/NSD crank pin	Model P/N/Q/NSD crank pin. Made from Aerospace grade material this pin is made to withstand hard condition. This batch was made for the Cannonball Run across the USA and My crank completed 4000 miles on the road running 3/4 to full throttle each day.	£100.00
	Model P/N/Q/NSD guides	Valve guides made from cast iron or from Colsibro I believe Colsibro is the best on exhaust Valves and can be used of Inlets also. I raced my model P across the USA with Colsibro guides and never got a stuck Valve running 1 1/2 thou clearance on both	From: £22.00
	Mudguard Model P etc	Mudguard Model late SD ,P ,N ,Q NSD etc C shape guard for 26 '' tyres plain section no dimples you will need to dimples to suit Note:- large item so postage to overseas can be over £50 each they pack to be around 80cm x 60 cm x 20 cm in size and around 2.5 kg each	£50.00
	Nut 1/2 thread 1/2 wide	Nut 1/2 thread 1/2 wide x13.16 hex	£3.00
	Nut 1/4 whit	Nut 1/4 whit. Nut 1/4 whit x 1/4 wide x 1/2 hex used on seats and other parts of bike.	£2.00
	Nut 1/4 x 24 x 1/4 wide	Nut 1/4 x 24 tpi x1/4 wide 7/16 hex Magneto stay and model P bolts on crankcase and frame farts	£2.25
	Nut 3/8 whit for seat and others	Nut 3/8 whit for seat and others. 3/8 whit x 3/8 wide domed end	£2.25
	Nut 3/8 x 13/32 wide	Nut 3/8 24 tpi x 13/32 wide 0.6 thou hex for some frame bolts	£3.00
	Nut 3/8 x 5/16 wide	Nut 3/8 x 5/16 wide 0.6 thou hex for some frame bolts	£3.00
	Nut Clutch spring adjuster Nut for model P,N and NSD	clutch spring adjuster nut for model P,N and NSD 1/4 x 24 tpi 6 required sold individually	£4.50
	Nut for frame seat bolts 3/8 whit	nut for frame seat bolt only 3/8 whit x 3/8wide x 600 hex	£1.75
	Nut Model P Cylinder 3/8 24tpi	Nut Model P Cylinder 3/8 24tpi x 3/8 wide from 1/2 hex	£2.25
	Petrol filler neck 2"	Petrol filler neck 2" bayonet used on later bikes	£20.00
	Piston rings 84 set x4 (2)	Piston rings 84 set P 84mm x4 x 3 set of 2	£20.00
	Piston rings 84.5 set x 4 (P)(2)	Piston rings 84.5 set P 84.5 mm x 4 x 3 set of 2	£20.00
	Primary cover P/N and later	Hand made to fit P and N will fit most model up to early NSD	£300.00

Page
« Prev |1|2|3|4|5|6| Next »