Model H Spares

Home > Model H Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Exhaust Model H	Exhaust for Model H Very good copy of original middle comes apart like they where made 90 years ago all hand made. Nickled down pipe with exhaust nut fitted	£400.00
	Front Brake Stirrup Bracket L and R	Front Brake Stirrup Bracket L and R. 1 pair	£50.00
	Fuel Cap 1 5/8 brass	Fuel Cap 1 5/8 brass stamped Rotherhams Coventry. Ready to plate. Bayonet clip on cap. Spring inside is slightly larger than some originals and can prevent the cap from closing. Spring can be easily modified to fit. Otherwise it can be loose on repro tanks. Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.	£66.70
	Fuel tank pump tube	15/16 bore x 1 inch od x 141mm long	£40.00
	Gasket Barrel base	Paper gasket for the barrel Base Veteran is 1910 to 1914 Model H,SD, Ricardo Model P, N,NSD	£5.75
	Gudgeon pin 16mm vintage	Gudgeon pin 16mm vintage 16mm dia 76mm long 8mm bore	£11.50
	Manual 1920 Model H spares	Manual 1920 Model H spares	£11.50
	Manual 1925 H / SD / R spares	Manual 1925 H / SD / R spares	£11.50
	Nut 1/4 whit	Nut 1/4 whit. Nut 1/4 whit x 1/4 wide x 1/2 hex used on seats and other parts of bike.	£2.53
	Nut 1/4 x 24 x 1/4 wide	Nut 1/4 x 24 tpi x1/4 wide 7/16 hex Magneto stay and model P bolts on crankcase and frame farts	£2.30
	Nut 3/8 frame domed head 5/16 wide	Nut 3/8 x 24 tpi frame domed head 5/16 wide x 600 thou hex used on veterans also	£3.45
	Nut 3/8 x 0.280 wide domed head	Nut 3/8 x 0.280 wide 0.6 thou hex for veteran frame bolts mainly.	£3.45
	Nut 3/8 x 13/32 wide domed head	Nut 3/8 x 24 tpi x 13/32 wide 0.6 thou hex for some frame bolts	£3.45
	nut 5/16 whit thin	nut 5/16 whit thin 5/16 whit x 1/4 wide x 0.525 hex	£2.30
	Nut 5/16 whit x 0.300 wide for spring clamp bolt	Nut for front spring clamp bolt 3/8 whit x 0.300 wide 7/16 hex	£2.87
	Nut 7/16 thread built in washer	Nut 7/16 x 24tpi thread built in washer used on Junior foot pedal and in other places	£5.75
	Nut carrier 3/8 x 24 Tpi x 0.165 wide.	Nut for carrier bolts 3/8 x 24 Tpi x 0.165 thou wide. 1/2 hex	£3.45
	Nut crank pin 5/8	Nut crank pin 5/8 x 1/4 wide x 0.940 hex	£4.60
	Nut crankcase 1/4 blind hole	Nut crankcase 1/4 x24 tpi blind hole Used on veteran and vintage cases and other parts of the bike	£6.00
	Nut exhaust ring Model H and SD	Nut exhaust ring	£40.25

Page
« Prev |1|2|3|4|5|6|7|8| Next »