Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > Model H Spares

Magneto spares

ImageNameDescriptionPriceQty 
Casting T piece Late
Casting T piece Late

Casting T piece Late

will fit from 1914 / H ? early SD

£25.00
Celluloid handlebar grips 3.5" 7/8 bars
Celluloid handlebar grips 3.5" 7/8 bars

Celluloid handlebar grips 3.5" 7/8 bars

1 pair

£65.00
Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot
Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 footChain timing 1/2 x 1/8
sold buy 300mm/ 1 foot
SD/Ricardo/H 46 links need  2 feet needed
SD/Ricardo Dyno 48 links 3 feet needed
Model P 44 link 2 feet needed
£13.50
Chain 5/8 x 3/8 x 101 links
Chain 5/8 x 3/8 x 101 linksChain 5/8 x 3/8
Used on model H Primary and SD and Ricardo rear chains.
Sold buy the box only 101 links of Regina comes with one link in the box.

H 52 link primary
Sd rear 92 Links
£52.00
Chain Link 1/2 x 1/8
Chain Link 1/2 x 1/8Chain Link 1/2 x 1/8
1 connector
£4.50
Chain Link 1/2 x 1/8 - 1/2 link
Chain Link 1/2 x 1/8 - 1/2 link

Chain Link 1/2 x 1/8 - 1/2 link

used when you need a odd number of rollers

£4.50
Chain link 5/8 x 3/8
Chain link 5/8 x 3/8Chain link 5/8 x 3/8
1 connector
£4.50
Chain Link 5/8 x 3/8 - 1/2 link
Chain Link 5/8 x 3/8 - 1/2 link

Chain Link 5/8 x 3/8 - 1/2 link

used when you need a odd roller

£4.50
Champion Spark Plug 6 COM
Champion Spark Plug 6 COMChampion Spark Plug 6 COM new old stock

once their gone their gone

I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7
£15.00
Clutch Friction Plate Model H and Sturmey Archer CS gear Box
Clutch Friction Plate Model H and Sturmey Archer CS gear Box £13.75
Clutch Plate CS gearbox Sturmey Archer
Clutch Plate CS gearbox Sturmey Archer £7.70
Control lever single
Control lever singleControl lever single
unplated used to Advance Magento
£120.00
Control lever twin
Control lever twin £150.00
Crank pin Veteran/H/SD
Crank pin Veteran/H/SD

Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H 

also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand

From: £65.00
Front Brake Stirrup Bracket L and R
Front Brake Stirrup Bracket L and RFront Brake Stirrup Bracket L and R. 1 pair£44.00
Fuel Cap 1 5/8 brass
Fuel Cap 1 5/8 brassFuel Cap 1 5/8 brass stamped Rotherhams Coventry.
Ready to plate.
Bayonet clip on cap.

Spring inside is slightly larger than some originals and can prevent the cap from closing.
Spring can be easily modified to fit. Otherwise it can be loose on repro tanks.
Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.
 
£58.00
Gasket Barrel base
Gasket Barrel base

Paper gasket for the barrel Base

Veteran is 1910 to 1914

Model H,SD, Ricardo

Model P, N,NSD 

£5.00
Gudgeon pin 16mm vintage
Gudgeon pin 16mm vintage

Gudgeon pin 16mm vintage

16mm dia

76mm long

8mm bore

£10.00
Handle bars Model H ,SD
Handle bars Model H ,SDHandle bars Model H and SD 7/8 dia
approximately 2 foot centres
£44.00
Manual 1920 Model H spares
Manual 1920 Model H sparesManual 1920 Model H spares£10.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies