Model H Spares

Home > Model H Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Cable No3 control	Control cable No3 0.085 dia inter 5 metres of inter and outer	£20.00
	Oil pump leather washer 15/16	Oil pump leather washer 15/16 OD	£2.50
	Spring Cs gear box kick start up to around 1918 (Early) eye on end	Cs gear box kick start spring up to around 1918 With A eye on the end that a bolt holds the spring to gearbox	£12.65
	Spring front brake stirrup	Spring for Front brake stirrup assembly	£2.30
	Spring H & Sd Valve set of 2	Valve spring set for Model H,SD 33.5 dia x 71 long, set of 2. Nickel plated	£18.40
	Spring clutch set of 6 cs box	Model H clutch spring set cs box. Set of 6 springs 0.600 Dia X 1.2 Inch Long	£20.00
	Spring carburettor throttle set of 2	Carburettor throttle spring set OF 2 springs 3/4 dia X 3 3/8 fit model H and later carbs with the same size springs.	£9.20
	Spring Cs gear box kick start 1919 onwards (Late) bent end	Cs gear box kick start spring late model with the bent end that fits into the box.	£12.65
	Spring Cs kickstart clip	Cs kickstart clip to hold up kickstarter on the box	£12.65
	Casting Number plate bracket	Bronze casting unmachined	£18.40
	Battery box Lucas	Lucas battery box made to the same quality as the originals one but from tin plate to stop them rusting out! Limited run of them.	£300.00
	Belt Dressing (Aerosol can)(UK ONLY)	Pick up at show only as postage restriction apply Used to reduce slip in belts. no overseas postage	£8.50
	Brake Block 88	New brake blocks used on Model H and SD plus can be modified to be used on Model P also. They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)	£61.00
	Brake Block front shoe	New Brake block material 75mm x 25 mm x10mm thick to make front stirrup brake pads Sold as one shoe Total of 2 needed for a front brake £50.00 in total They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)	£27.00
	Cable carburettor no0	Carburettor cable no0 Over 130cm long on outer so cut to suit your application will fit veteran carbs and all the Vintage twin barrel carbs up to 1928 made of no 0 cable	£17.00
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£9.00
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£8.50
	Carburettor drain cap twin barrel	Carburetor drain cap twin barrel H etc	£13.00
	Carburettor Float twin barrel carbs	Float Vintage twin barrel Carburettor Brand new carb float to fit float bowls with the needle that seals in the top screw on cap. Will fit model H,SD,P,PN,N,NSD etc	£57.50
	Carburettor fuel nipple	Carburettor fuel nipple to fit the 3/16 copper pipe into.	£7.50

Page
« Prev |1|2|3|4|5|6|7| Next »