Junior/Baby Spares

Home > Junior/Baby Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Brooks seat spring B130 1LH / 1RH	Brooks seat spring B130 2 coils less then this photo 1LH / 1RH 49 mm from end to centre of spring eye. 50.5mm od	£28.75
	Cable Nipple 1743/25 5 off	Cable end 1743 bag of 5 ends. 1/4 dia, 200 thou long, 72 thou hole used as a cylinder	£3.00
	Cable nipple 2448-P 5 off	Cable end 2448 bag of 5 ends. 1/4 dia x 1/4 inch long 100 thou hole used as a ball	£3.00
	Cable nipple 783 5off	Cable nipple 783 bag of 5. 155 thou dia on big end then 108 thou dia by 220 thou long 72 thou hole used on inverted levers and valve lifters.	£3.00
	Cable nipples 1244 5off	Cable nipples 1244 bag of 5 1/8 dia x 1/8 long 72 thou hole use as a cylinder on end of cable	£3.00
	Cable nipples 2451 5 off	Cable nipples 2451 bag of 5. 190 thou on big end then 140 thou dia 300 thou long 72 thou hole used on inverted levers	£3.00
	Cable No0 control	Control cable No 0 0.050 dia inter. 5 meters of inter and outer in a bag.	£16.00
	Cable No1 control	Cable No1 control 0.062 dia inter. 5 metres of inter and outer.	£17.00
	Cable No2 control	Control cable No2 0.075 dia inter. 5 metres of inter and outer.	£18.00
	Spring front brake stirrup	Spring for Front brake stirrup assembly	£2.30
	Spring exhaust valve lifter	Exhaust valve lifter spring 0.300 od x 1 3/8 long GOES IN BRASS CASTING ON BACK OF PLATE MODEL H AND SD / RICARDO	£4.02
	Spring Junior brake pedal	Baby brake pedal spring.	£6.90
	Bolt Veteran and model H fork top clamp	Bolts for Veteran and model H fork top clamp 3/8 dia x 1.75 long buy nut 3/8 whit x 0.300 wide if nut is needed	£10.35
	Brake Block front shoe	New Brake block material 75mm x 25 mm x10mm thick to make front stirrup brake pads Sold as one shoe Total of 2 needed for a front brake £50.00 in total They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)	£25.00
	Brake plate Junior Triumph insert	Brake plate Junior Triumph	£6.32
	Cable carburettor no0	Carburettor cable no0 Over 130cm long on outer so cut to suit your application will fit veteran carbs and all the Vintage twin barrel carbs up to 1928 made of no 0 cable	£17.00
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£9.00
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£8.50
	Carburettor fuel nipple	Carburettor fuel nipple to fit the 3/16 copper pipe into.	£7.50
	Carburettor main jet	Carburettor main jet for the vintage twin barrel Carburettor ( both barrel are the same size). Drilled 28 thou use a set of number drill to increase in size if needed.	£12.00

Page
« Prev |1|2|3|4|5| Next »