1913 Spares

Home > 1913 Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Badge 1913/14 fuel guage	Badge 1913/14 fuel guage screen printed disc only.	£17.25
	Badge timing cover	Badge for timing cover need to be drilled to suit your cover	£19.55
	Ball 1/4 Pack of 48	Ball 1/4 - Pack of 48	£3.45
	Ball 3/16 Pack of 48	Ball 3/16 pack of 48	£3.45
	Ball 5/32	Ball 5/32 sold per ball at £0.10 each	£0.11
	Ball 50 x 1/8	Ball 1/8 in a pack of 50	£3.45
	Ball 7/32	Ball 7/32 sold as one ball at £0.10	£0.11
	Bearing MC22	MC22 RS bearing single row bearing 22 x 50 x 17mm. Now with a oil seal in one side also.	£40.00
	Bearing upper race set Veterans and Model H/SD and Ricardo	Bearing upper race set veterans and model H/SD and ricardo Inter and out race no balls	£50.60
	Bolt 1/4 Crankcase domed end 3.900	Crankcase bolt domed end 1/4 thread x 3.900 long with 1.100 long on thread cut down to suit early models	£6.90
	Bolt Crankcase 1/4 stud x 4 1/2 long for exhaust	Crankcase bolt 1/4 threaded both ends used to hold on Exhaust casting one needed.4 1/2 inch long	£4.02
	Bolt crankcase stud 1/4 x 4 1/4 long	Crankcase bolt 1/4 x 4 1/4 long threaded both ends for veteran case . Approximately 4 used in the case plus one long one for exhaust.	£4.02
	Bolt domed head Engine to frame 1/2 x 2.90 long	Bolt domed head Engine to frame 1/2 x 2.90 long	£8.05
	Bolt domed head engine to frame 9/16 x 3 long	Bolt domed head engine to frame 9/16 x 24 tpi x 3 long	£8.63
	Bolt Domed head Magneto hanger 1/4	Bolt Domed head Magneto hanger 1/4 x 1 long screwdriver slot.	£4.02
	Bolt eccentric clamp and nut	Eccentric bolt that clamps pedalling gear casting in the frame with square head nut.	£20.70
	Bolt Engine to frame 3/8 x 2.900 long domed head	Bolt Engine to frame 3/8 x 24 tpi x 2.900 long domed head.	£6.90
	Bolt for Mudguards 1/4 x 1/2 long	Bolt for Mudguards stays 1/4 x 1/2 long with built in washer.	£6.00
	Bolt fork Pivot to spring	Fork Buttress bolt that clamps to the spring housing 5/16 x 30 tpi special thread Thread to under side of head.	£10.00
	Bolt H/sd rear stand	Bolt H/sd rear stand 3/8 x 24 tpi x 11/16 hex domed head with built in washer	£10.35

Page
« Prev |1|2|3|4|5|6|7|8| Next »