Common Spares - Page 5

Home > Common Spares

Image	Name	Description	Price	Qty
	Casting Fork Lamp bracket	Casting for Fork Lamp bracket investment cast in nickel bronze	£12.00
	Casting rear Carrier Y	Casting rear stand Y used in veterans and model H etc rear carriers. 1 of	£8.00
	Casting Veteran exhaust pipe side	Casting Veteran exhaust pipe side investment cast in steel very good copy needs machining	£65.00
	casting Veteran magneto platform	Veteran magneto platform casting part of the exhaust box 1 of 3 castings	£30.00
	Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot	Chain timing 1/2 x 1/8 sold buy 300mm/ 1 foot SD/Ricardo/H 46 links need 2 feet needed SD/Ricardo Dyno 48 links 3 feet needed Model P 44 link 2 feet needed	£12.00
	Chain 1/2 x 3/16 pedal chain sold buy 300mm/ 1 foot	Chain 1/2 x 3/16. Used on pedalling Gear on veterans bikes sold buy the foot / 300mm ------- 3 feet need approximately please check	£10.00
	Chain 5/8 x 1/4 x 97 links	Chain 5/8 x 1/4. sold buy the box 97 links of Regina comes with one link in the box. final drive and from engine to gearbox also SD/P/N/Q/QA Primary 52 links P/Q/N Rear Chain Solo 89 with a 38 teeth rear side car 92 with a 43 teeth rear	£47.00
	Chain 5/8 x 3/8 x 101 links	Chain 5/8 x 3/8 Used on model H Primary and SD and Ricardo rear chains. Sold buy the box only 101 links of Regina comes with one link in the box. H 52 link primary Sd rear 92 Links	£47.00
	Chain Link 1/2 x 1/8	Chain Link 1/2 x 1/8 1 connector	£4.00
	Chain link 1/2 x 3/16	Chain link 1/2 x 3/16	£4.00
	Chain link 5/8 x 1/4		£4.00
	Chain link 5/8 x 3/8	Chain link 5/8 x 3/8 1 connector	£4.00
	Champion Spark Plug 6 COM	Champion Spark Plug 6 COM new old stock once their gone their gone I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7	£14.00
	Clutch Friction Plate Model CO-CSD and Later	New clutch Plates laser cut from modern material 143mm OD 111mm ID x 2.5mm Thick	£15.00
	Clutch Friction Plate Model H and Sturmey Archer CS gear Box		£12.50
	Clutch Friction Plate Model P/N and later		£12.50
	Control lever single	Control lever single unplated used to Advance Magento	£110.00
	Control lever twin		£140.00
	Front Brake Stirrup Bracket L and R	Front Brake Stirrup Bracket L and R. 1 pair	£40.00
	Fuel Cap 1 5/8 brass	Fuel Cap 1 5/8 brass stamped Rotherhams Coventry. Ready to plate. Bayonet clip on cap. Spring inside is slightly larger than some originals and can prevent the cap from closing. Spring can be easily modified to fit. Otherwise it can be loose on repro tanks. Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.	£52.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »