Common Spares - Page 4

Home > Common Spares

Image	Name	Description	Price	Qty
	Cable No1 control	Cable No1 control 0.062 dia inter. 5 metres of inter and outer.	£12.00
	Cable No2 control	Control cable No2 0.075 dia inter. 5 metres of inter and outer.	£12.00
	Cable No3 control	Control cable No3 0.085 dia inter 5 metres of inter and outer	£12.00
	Oil pump leather washer	Oil pump leather washer 15/16 OD	£1.50
	Spring front brake stirrup	Spring for Front brake stirrup assembly	£1.50
	Spring carburettor throttle set of 2	Carburettor throttle spring set ,2 springs 3/4 dia X 3 3/8 fit model H and later carbs with the same size springs.	£6.50
	Casting Number plate bracket	Bronze casting unmachined	£13.00
	Bearing 1163X/1120NI 1/2 bore wheel bearing	Bearing 1163X/1120NI 1/2 bore wheel bearing. for Triumph P and later 1/2 x 1 3/4 x 7/8 wide	£42.00
	Bearing 1163X/1120NI 9/16 bore wheel bearing	Bearing 1163X/1120NI 9/16 bore wheel bearing. for Triumph P and later 9/16 x 1 3/4 x 7/8 wide	£42.00
	Bearing 1178X/1120NI 5/8 bore wheel bearing		£42.00
	Belt Dressing (Aerosol can)(UK ONLY)	Pick up at show only as postage restriction apply Used to reduce slip in belts. no overseas postage	£6.50
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£5.50
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£7.00
	Carburettor Float twin barrel carbs	Float Vintage twin barrel Carburettor Brand new carb float to fit float bowls with the needle that seals in the top screw on cap. Will fit model H,SD,P,PN,N,NSD etc	£47.00
	Carburettor Float Veteran carbs	Carburettor Float Veteran carbs Brand new carb float to fit float bowls with the bob weights that move the needle onto its seat.	£47.00
	Carburettor bolt gasket	Carburettor bolt gasket petrol resistant material	£1.25
	Carburettor fuel bowl gasket	Carburettor fuel bowl gasket petrol residence Material some of the early bowls need a small amount taking of OD I do it on the grinder on the od	£2.00
	Carburretor locking bolt 1/4 thread	Carburretor locking bolt 1/4 thread whit x 41/64 under shoulder with square head and screw driver slot	£2.00
	Casting Brooks seat badge	Bronze Lost wax seat seat badge need runner dressing off before plating	£11.00
	Casting CS gearbox Clutch Arm	Bronze casting Need Machining for your application	£12.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »