Common Spares - Page 3

Home > Common Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Spring carburettor throttle set of 2	Carburettor throttle spring set OF 2 springs 3/4 dia X 3 3/8 fit model H and later carbs with the same size springs.	£9.20
	Casting Number plate bracket	Bronze casting unmachined	£18.40
	Battery box Lucas	Lucas battery box made to the same quality as the originals one but from tin plate to stop them rusting out! Limited run of them.	£300.00
	Belt Dressing (Aerosol can)(UK ONLY)	Pick up at show only as postage restriction apply Used to reduce slip in belts. no overseas postage	£8.50
	Cable carburettor no0	Carburettor cable no0 Over 130cm long on outer so cut to suit your application will fit veteran carbs and all the Vintage twin barrel carbs up to 1928 made of no 0 cable	£17.00
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£9.00
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£8.50
	Carburettor Float twin barrel carbs	Float Vintage twin barrel Carburettor Brand new carb float to fit float bowls with the needle that seals in the top screw on cap. Will fit model H,SD,P,PN,N,NSD etc	£57.50
	Carburettor Float Veteran carbs	Carburettor Float Veteran carbs Brand new carb float to fit float bowls with the bob weights that move the needle onto its seat.	£57.50
	Carburettor fuel nipple	Carburettor fuel nipple to fit the 3/16 copper pipe into.	£7.50
	Carburettor main jet	Carburettor main jet for the vintage twin barrel Carburettor ( both barrel are the same size). Drilled 28 thou use a set of number drill to increase in size if needed.	£12.00
	carburettor tickler	carburettor tickler for vintage twin barrel carburettor ( barrel has both bores the same size)	£20.00
	Carburettor bolt gasket	Carburettor bolt gasket petrol resistant material	£1.50
	Carburettor fuel bowl gasket	Carburettor fuel bowl gasket petrol residence Material some of the early bowls need a small amount taking of OD I do it on the grinder on the od	£2.50
	Carburretor locking bolt 1/4 thread	Carburretor locking bolt 1/4 thread whit x 41/64 under shoulder with square head and screw driver slot	£2.50
	Casting Brooks seat badge	Bronze Lost wax seat seat badge need runner dressing off before plating	£13.80
	Casting CS gearbox Clutch Arm	Bronze casting Need Machining for your application	£14.95
	Casting Fork Lamp bracket	Casting for Fork Lamp bracket investment cast in nickel bronze	£20.70
	casting front forks	Front fork Casting set will fit veterans and also model H forks investment cast in En8 steel We have had to order 40 sets to make some complete forks limited time will be sell casting for repairs or make your own forks	£120.00
	Casting rear Carrier Y	Casting rear stand Y used in veterans and model H etc rear carriers. 1 of	£17.25

Page
« Prev |1|2|3|4|5|6| Next »