Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > 1914 Spares


ImageNameDescriptionPriceQty 
Fuel Cap 1 5/8 brass
Fuel Cap 1 5/8 brassFuel Cap 1 5/8 brass stamped Rotherhams Coventry.
Ready to plate.
Bayonet clip on cap.

Spring inside is slightly larger than some originals and can prevent the cap from closing.
Spring can be easily modified to fit. Otherwise it can be loose on repro tanks.
Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.
 
£52.00
Handle bars Veterans late 1913 (early baby)
Handle bars Veterans late 1913 (early baby)Handle bars Veterans 7/8 bars 22 inch across approx£40.00
Manual 1914 spares
Manual 1914 sparesManual 1914 spares£8.50
Nut 1/4 Crankcase  veteran
Nut 1/4 Crankcase veteranCrankcase nut for veteran cases. 1/4 thread.threaded right through not into a blind hole£3.00
Nut 1/4 whit
Nut 1/4 whitNut 1/4 whit.
Nut 1/4 whit x 1/4 wide x 1/2 hex
used on seats and other parts of bike.
£2.00
Nut 1/4 x 24 x 1/4 wide
Nut 1/4 x 24 x 1/4 wideNut 1/4 x 24 tpi x1/4 wide 7/16 hex
Magneto stay and model P bolts on crankcase and frame farts
£2.25
Nut 3/8 frame domed head  5/16 wide
Nut 3/8 frame domed head 5/16 wideNut 3/8 x 24 tie frame domed head  5/16 wide x 600 thou hex
used on veterans
£3.25
Nut 3/8 x 5/16 wide
Nut 3/8 x 5/16 wideNut 3/8 x 5/16 wide 0.6 thou hex for some frame bolts£3.00
Nut 5/16 whit x 0.300 wide for spring clamp bolt
Nut 5/16 whit x 0.300 wide for spring clamp boltNut for front spring clamp bolt 3/8 whit x 0.300 wide 7/16 hex£3.00
Nut 7/16 thread built in washer
Nut 7/16 thread built in washer £3.50
Nut crankcase 1/4 blind hole
Nut crankcase 1/4 blind holeNut crankcase 1/4 x24 tpi blind hole

Used on veteran and vintage cases and other parts of the bike
£4.00
Nut exhaust ring Veterans
Nut exhaust ring VeteransNut exhaust ring Veterans£32.00
Nut for carrier 3/8 x 24 Tpi x 0.160 wide.
Nut for carrier 3/8 x 24 Tpi x 0.160 wide.Nut for carrier bolts 3/8 x 24 Tpi x 160 wide. 1/2 hex£2.75
Nut for Cylinder barrel late
Nut for Cylinder barrel lateNut for Cylinder barrel  5/16 whit£6.85
Nut for forks with shoulder 3/8 thread
Nut for forks with shoulder 3/8 threadNut for forks with shoulder 3/8 thread x 0.3 shoulder£5.25
Nut for forks with shoulder 7/16 thread x 0.8 shoulder
Nut for forks with shoulder 7/16 thread x 0.8 shoulderNut for forks with shoulder 7/16 thread x 0.8 shoulder£4.85
Nut for veteran frame bolt 1/2
Nut for veteran frame bolt 1/2Nut for veteran frame bolt 1/2 built in wahser£4.85
Nut for veteran frame bolt 9/16 thread
Nut for veteran frame bolt 9/16 threadNut for veteran frame bolt 9/16 thread built in washer£6.25
Nut for Veteran Pulley
Nut for Veteran PulleyNut for Veteran Pulley engraved not plated£40.00
Nut fork Pivot
Nut fork PivotFork Pivot nut
5/16  x 30 tpi special thread

holds spring carrier to top of forks when used with fork pivot bolt
£3.00

Page
« Prev |1|2|3|4|5|6|7|8|9| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies