1914 Spares - Page 3

Home > 1914 Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Spring front brake stirrup	Spring for Front brake stirrup assembly	£2.30
	Springs 1914 Valve	Late model veteran Valve springs 5 mm longer to suit barrel. Square section wire as originals for 550 engine only. 1 Pair	£23.00
	Spring carburettor throttle set of 2	Carburettor throttle spring set OF 2 springs 3/4 dia X 3 3/8 fit model H and later carbs with the same size springs.	£9.20
	Casting Number plate bracket	Bronze casting unmachined	£18.40
	casting Veteran brake shoe	Casting for Veteran brake shoe from SG iron has to be fettled and machined to suit your application	£31.62
	Best and Lloyd Oil Pump	Best and Lloyd Oil Pump. Used on 13/14 triumphs. 3 Mounting holes are not aligned with bracket (concentric), see picture. Unique to triumph models.	£350.00
	Bolt Vintage Seat model H	Vintage Seat Bolt Domed head 3/8 whit x 4.100 long model H. does fir some other Model please check like early SD/Ricardo's and late Veterans	£12.65
	Brake Block 11	New brake block for veteran triumphs up to 1914 rear brakes They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)	£61.00
	Brake Block front shoe	New Brake block material 75mm x 25 mm x10mm thick to make front stirrup brake pads Sold as one shoe Total of 2 needed for a front brake £50.00 in total They are being sold for Display use Only and if Used for Road use are used at you Own Risk as per our terms and conditions.(because a brake insurance policy cost so much to run and would double the price)	£27.00
	Cable carburettor no0	Carburettor cable no0 Over 130cm long on outer so cut to suit your application will fit veteran carbs and all the Vintage twin barrel carbs up to 1928 made of no 0 cable	£17.00
	Carburetor fuel nut	Carburetor fuel nut 9/16 X 25Tpi Brass hex.	£9.00
	Carburetor needle	Carburettor needle 72.5mm suits early Model H 78.6 mm suits P and later 85mm long machine to what you need check your size as there has been some carbs that need longer Needles and are from the wrong model also you must set your float level one this is installed	£8.50
	Carburettor drain cap twin barrel	Carburetor drain cap twin barrel H etc	£13.00
	Carburettor Float Veteran carbs	Carburettor Float Veteran carbs Brand new carb float to fit float bowls with the bob weights that move the needle onto its seat.	£57.50
	Carburettor fuel nipple	Carburettor fuel nipple to fit the 3/16 copper pipe into.	£7.50
	Carburretor locking bolt 1/4 thread	Carburretor locking bolt 1/4 thread whit x 41/64 under shoulder with square head and screw driver slot	£2.50
	Cast rear Forks No B	Cast rear Forks No B used as brake arm mount and exhaust lug also	£13.80
	Casting Best and Lloyd oil pump	Best and Lloyds casting. for 1913 /14 oil pump on the side of the tank.unmachined	£25.30
	Casting clutch hub	Casting for clutch hub models	£31.05
	Casting Fork Lamp bracket	Casting for Fork Lamp bracket investment cast in nickel bronze	£20.70

Page
« Prev |1|2|3|4|5|6|7| Next »