Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > 1913 Spares

Magneto spares

ImageNameDescriptionPriceQty 
Champion Spark Plug 6 COM
Champion Spark Plug 6 COMChampion Spark Plug 6 COM new old stock

once their gone their gone

I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7
£15.00
Control lever single
Control lever singleControl lever single
unplated used to Advance Magento
£120.00
Control lever twin
Control lever twin £150.00
Crank pin Veteran/H/SD
Crank pin Veteran/H/SD

Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H 

also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand

From: £65.00
Freewheel 22 teeth 1 5/8 thread
Freewheel 22 teeth 1 5/8 threadFreewheel 22 teeth 1 5/8 thread 24 tpi for 083 chain£140.00
Front Brake Stirrup Bracket L and R
Front Brake Stirrup Bracket L and RFront Brake Stirrup Bracket L and R. 1 pair£44.00
Fuel Cap 1 5/8 brass
Fuel Cap 1 5/8 brassFuel Cap 1 5/8 brass stamped Rotherhams Coventry.
Ready to plate.
Bayonet clip on cap.

Spring inside is slightly larger than some originals and can prevent the cap from closing.
Spring can be easily modified to fit. Otherwise it can be loose on repro tanks.
Cut off 2 - 4 mm of spring, Heat up till red the end of spring and push flat, Grind flat and Use.
 
£58.00
Gasket Barrel base
Gasket Barrel base

Paper gasket for the barrel Base

Veteran is 1910 to 1914

Model H,SD, Ricardo

Model P, N,NSD 

£5.00
Gudgeon pin 14mm veteran
Gudgeon pin 14mm veteran

Gudgeon pin veteran

14mm Dia

76mm long

8mm bore

£10.00
Handle bars Veterans late 1913 (early baby)
Handle bars Veterans late 1913 (early baby)Handle bars Veterans 7/8 bars 22 inch across approx£44.00
Manual 1913 spares
Manual 1913 sparesManual 1913 spares£10.00
Nut 1/4 Crankcase  veteran
Nut 1/4 Crankcase veteranCrankcase nut for veteran cases. 1/4 thread.threaded right through not into a blind hole£3.50
Nut 1/4 whit
Nut 1/4 whitNut 1/4 whit.
Nut 1/4 whit x 1/4 wide x 1/2 hex
used on seats and other parts of bike.
£2.20
Nut 1/4 x 24 x 1/4 wide
Nut 1/4 x 24 x 1/4 wideNut 1/4 x 24 tpi x1/4 wide 7/16 hex
Magneto stay and model P bolts on crankcase and frame farts
£2.00
Nut 3/8 frame domed head  5/16 wide
Nut 3/8 frame domed head 5/16 wideNut 3/8 x 24 tpi frame domed head  5/16 wide x 600 thou hex
used on veterans also
£3.00
Nut 3/8 x  0.280 wide domed head
Nut 3/8 x 0.280 wide domed headNut 3/8 x 0.280 wide 0.6 thou hex for veteran frame bolts mainly.£3.00
Nut 3/8 x 13/32 wide domed head
Nut 3/8 x 13/32 wide domed headNut 3/8 x 24 tpi x 13/32 wide 0.6 thou hex for some frame bolts£3.00
nut 5/16 whit thin
nut 5/16 whit thin

nut 5/16 whit thin

5/16 whit x 1/4 wide x 0.525 hex

£2.00
Nut 5/16 whit x 0.300 wide for spring clamp bolt
Nut 5/16 whit x 0.300 wide for spring clamp boltNut for front spring clamp bolt 3/8 whit x 0.300 wide 7/16 hex£2.50
Nut 7/16 thread built in washer
Nut 7/16 thread built in washerNut 7/16 x 24tpi thread built in washer used on Junior foot pedal and  in other places£5.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies