1913 Spares - Page 4

Home > 1913 Spares

Magneto Spares

Image	Name	Description	Price	Qty
	Casting offside stand for clutch hub	Casting offside stand for clutch hub	£28.75
	Casting Pedal hanger 4 " centres		£12.65
	Casting rear Carrier Y	Casting rear stand Y used in veterans and model H etc rear carriers. 1 of	£17.25
	casting rear forks belt Kick out	casting rear forks belt Kick out	£25.30
	casting rear forks L/H	casting rear forks left hand end	£28.75
	casting rear forks pedal eccentric	casting rear forks pedal eccentric	£34.50
	casting rear forks R/H	casting rear forks Right hand end	£28.75
	Casting rear stand swivel	Casting for rear stand swivel one cast lug.	£12.65
	casting rear stay ends No D	casting rear stay ends casting 2 cast needed per rear stays Sold as 1 casting 1 top lug and 1` bottom lug can be used in most model to make the stays from	£13.80
	Casting stand arms 1 pair	Casting stand arms set of 2 one 1 L/H and 1 R/H	£57.50
	Casting Veteran front Mudguard	Casting for Veteran front Mudguard cast SG iron	£25.30
	Castings pedal eccentric	Eccentric castings for peadling gear unmachined	£28.75
	Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot	Chain timing 1/2 x 1/8 sold buy 300mm/ 1 foot SD/Ricardo/H 46 links need 2 feet needed SD/Ricardo Dyno 48 links 3 feet needed Model P 44 link 2 feet needed	£10.92
	Chain 1/2 x 3/16 pedal chain sold buy 300mm/ 1 foot	Chain 1/2 x 3/16. Used on pedalling Gear on veterans bikes sold buy the foot / 300mm ------- 3 feet need approximately please check	£15.52
	Chain Link 1/2 x 1/8	Chain Link 1/2 x 1/8 1 connector	£5.17
	Chain link 1/2 x 3/16	Chain link 1/2 x 3/16	£5.17
	Champion Spark Plug 6 COM	Champion Spark Plug 6 COM new old stock once their gone their gone I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7	£18.97
	Control lever single	Control lever single unplated used to Advance Magento	£138.00
	Control lever twin		£172.50
	Crank pin Veteran/H/SD	Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand	From: £74.75

Page
« Prev |1|2|3|4|5|6|7|8| Next »