Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > 1913 Spares


ImageNameDescriptionPriceQty 
Bolt domed head engine to frame 9/16 x 3 long
Bolt domed head engine to frame 9/16 x 3 longBolt domed head engine to frame 9/16 x 3 long£7.00
Bolt Domed head Magneto hanger 1/4
Bolt Domed head Magneto hanger 1/4Bolt Domed head Magneto hanger 1/4 x 1 long screwdriver slot.£2.90
Bolt eccentric clamp and nut
Bolt eccentric clamp and nutEccentric bolt that clamps pedalling gear casting in the frame with square head nut.£15.00
Bolt Engine to frame 3/8 x 2.900 long domed head
Bolt Engine to frame 3/8 x 2.900 long domed headBolt Engine to frame 3/8 x 24 tpi x 2.900 long domed head.£5.25
Bolt Engine to frame 3/8 x 3 5/8 long
Bolt Engine to frame 3/8 x 3 5/8 longBolt Engine to frame 3/8 x 3 5/8 long domed head£4.85
Bolt for Mudguards 1/4 x 1/2 long
Bolt for Mudguards 1/4 x 1/2 longBolt for Mudguards stays 1/4 x 1/2 long with built in washer.£3.50
Bolt for pinion gear
Bolt for pinion gearBolt for pinion gear 5/16 thread  1 1/8 long taper head with screwdriver slot
check with you old one first
£8.50
Bolt for Veteran and model H fork top clamp
Bolt for Veteran and model H fork top clampBolts for Veteran and model H fork top clamp  3/8 dia x 1.75 long

see nut 3/8 whit x 0.300 wide for the nut
£8.25
Bolt fork Pivot to spring
Bolt fork Pivot to springFork Pivot bolt that clamps to the spring housing
5/16  x 30 tpi special thread

Thread to under side of head.
£5.25
Bolt H/sd rear stand
Bolt H/sd rear standBolt H/sd rear stand 3/8  x 24 tpi x 11/16 hex domed head with built in washer£8.00
Bolt lubrication screws
Bolt lubrication screwsBolt lubrication screws 8ba thread with screwdriver slot£1.90
Bolt Magneto long square head
Bolt Magneto long square headMagneto Bolt long square head to bolt the magneto to the platform 3/8 whit thread.£11.50
Bolt Magneto short square head
Bolt Magneto short square headMagneto bolt short square head 3/8 whit to bolt Mag to platform. £9.25
Bolt rear Carrier veterans
Bolt rear Carrier veteransBolt rear Carrier veterans 3/8 and a 5/16 thread and 3/8 wide on hex
Will need a thin nut and split pin.
see nut section thin nut is 3/8 x 24 tpi x 0.16 wide
£9.75
Bolt rear stand clip
Bolt rear stand clipspecial bolt for rear stand clip 1/4 x 1 5/8 with split pin hole fit dog bone clamp onto this.£6.00
Bolt timing cover screw
Bolt timing cover screwBolt timing cover screw.
special thread 5mm x 26 tpi x 1 1/16 long
£3.65
Bolt Veteran saddle stem clamp 5/16
Bolt Veteran saddle stem clamp 5/16Veteran saddle stem clamp bolt 4 3/8 long 5/16 whit domed head£6.50
Bosch Advance unit
Bosch Advance unitBosch Advance unit goes on side of magento with spring inside £50.00
Brake Cannon
Brake Cannon £8.00
Brammer drive belt 7/8 Inch
Brammer drive belt 7/8 Inch
7/8 Brammer link drive belt.
3 link construction.
Sold by the foot.
£9.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies