1911 Spares - Page 4

Home > 1911 Spares

Magneto spares

Image	Name	Description	Price	Qty
	Casting rear stand swivel	Casting for rear stand swivel one cast lug.	£11.00
	casting rear stay ends No D	casting rear stay ends casting 2 cast needed per rear stays Sold as 1 casting 1 top lug and 1` bottom lug can be used in most model to make the stays from	£12.00
	casting rear stay hockey stick	casting rear stay hockey stick used on rear stay to miss the belt rim can be used on model H also may need some more kick added	£28.00
	Casting stand arms 1 pair	Casting stand arms set of 2 one 1 L/H and 1 R/H	£50.00
	Casting Veteran exhaust pipe side	Casting Veteran exhaust pipe side investment cast in steel very good copy needs machining	£72.00
	Casting Veteran front Mudguard	Casting for Veteran front Mudguard cast SG iron	£22.00
	Castings pedal eccentric	Eccentric castings for peadling gear unmachined	£25.00
	Celluloid handlebar grips 3.5" 7/8 bars	Celluloid handlebar grips 3.5" 7/8 bars 1 pair	£65.00
	Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot	Chain timing 1/2 x 1/8 sold buy 300mm/ 1 foot SD/Ricardo/H 46 links need 2 feet needed SD/Ricardo Dyno 48 links 3 feet needed Model P 44 link 2 feet needed	£13.50
	Chain 1/2 x 3/16 pedal chain sold buy 300mm/ 1 foot	Chain 1/2 x 3/16. Used on pedalling Gear on veterans bikes sold buy the foot / 300mm ------- 3 feet need approximately please check	£13.50
	Chain Link 1/2 x 1/8	Chain Link 1/2 x 1/8 1 connector	£4.50
	Chain Link 1/2 x 1/8 - 1/2 link	Chain Link 1/2 x 1/8 - 1/2 link used when you need a odd number of rollers	£4.50
	Chain link 1/2 x 3/16	Chain link 1/2 x 3/16	£4.50
	Champion Spark Plug 6 COM	Champion Spark Plug 6 COM new old stock once their gone their gone I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7	£15.00
	Control lever single	Control lever single unplated used to Advance Magento	£120.00
	Control lever twin		£150.00
	Crank pin Veteran/H/SD	Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand	From: £65.00
	Freewheel 22 teeth 1 5/8 thread	Freewheel 22 teeth 1 5/8 thread 24 tpi for 083 chain	£140.00
	Front Brake Stirrup Bracket L and R	Front Brake Stirrup Bracket L and R. 1 pair	£44.00
	Gasket Barrel base	Paper gasket for the barrel Base Veteran is 1910 to 1914 Model H,SD, Ricardo Model P, N,NSD	£5.00

Page
« Prev |1|2|3|4|5|6|7| Next »