Items: 0 Total: £0.00

Forgotten your password?
.

 
  Home > 1910 Spares


ImageNameDescriptionPriceQty 
Champion Spark Plug 6 COM
Champion Spark Plug 6 COMChampion Spark Plug 6 COM new old stock

once their gone their gone

I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7
£15.40
Control lever single
Control lever singleControl lever single
unplated used to Advance Magento
£121.00
Control lever twin
Control lever twin £154.00
Crank pin Veteran/H/SD
Crank pin Veteran/H/SD

Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H 

also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand

From: £66.00
Early Veteran Fork Buttress  Casting
Early Veteran Fork Buttress CastingEarly Veteran Fork Buttress  Casting made from SG iron ready to be machined.£33.00
Freewheel 22 teeth 1 5/8 thread
Freewheel 22 teeth 1 5/8 thread £137.50
Front Brake Stirrup Bracket L and R
Front Brake Stirrup Bracket L and RFront Brake Stirrup Bracket L and R. 1 pair£44.00
 
Gasket Barrel base

Paper gasket for the barrel Base

Veteran is 1910 to 1914

Model H,SD, Ricardo

Model P, N,NSD 

£5.00
Handle bars Veterans early
Handle bars Veterans early £44.00
Handle bars Veterans late 1913 (early baby)
Handle bars Veterans late 1913 (early baby)Handle bars Veterans 7/8 bars 22 inch across approx£44.00
Manual 1910 spares
Manual 1910 sparesManual 1910 spares£9.35
Mudguard stay bottom laser cutting
Mudguard stay bottom laser cuttingMudguard front stay laser cutting for 1908 to 10

1 of
£2.75
Nut 1/4 Crankcase  veteran
Nut 1/4 Crankcase veteranCrankcase nut for veteran cases. 1/4 thread.threaded right through not into a blind hole£3.30
Nut 3/8 frame domed head  5/16 wide
Nut 3/8 frame domed head 5/16 wideNut 3/8 x 24 tie frame domed head  5/16 wide x 600 thou hex
used on veterans
£3.58
Nut 3/8 x 5/16 wide
Nut 3/8 x 5/16 wideNut 3/8 x 5/16 wide 0.6 thou hex for some frame bolts£3.30
Nut 5/16 whit x 0.300 wide for spring clamp bolt
Nut 5/16 whit x 0.300 wide for spring clamp boltNut for front spring clamp bolt 3/8 whit x 0.300 wide 7/16 hex£3.30
Nut 7/16 thread built in washer
Nut 7/16 thread built in washer £3.85
Nut crankcase 1/4 blind hole
Nut crankcase 1/4 blind holeNut crankcase 1/4 x24 tpi blind hole

Used on veteran and vintage cases and other parts of the bike
£4.40
Nut exhaust ring Veterans
Nut exhaust ring VeteransNut exhaust ring Veterans£35.20
Nut for carrier 3/8 x 24 Tpi x 0.160 wide.
Nut for carrier 3/8 x 24 Tpi x 0.160 wide.Nut for carrier bolts 3/8 x 24 Tpi x 160 wide. 1/2 hex£3.03

Page
« Prev |1|2|3|4|5|6|7|8| Next »

Telephone : +44 (0) 777 3324238 
email: parts@veterantriumph.co.uk

Privacy & Cookies