1910 Spares - Page 4

Home > 1910 Spares

Magneto spares

Image	Name	Description	Price	Qty
	casting rear stay hockey stick	casting rear stay hockey stick used on rear stay to miss the belt rim can be used on model H also may need some more kick added	£28.00
	Casting stand arms 1 pair	Casting stand arms set of 2 one 1 L/H and 1 R/H	£50.00
	casting Timing cover early		£110.00
	Casting Veteran brake pedal	Casting Veteran brake pedal 1908 to approx 1910	£22.00
	Casting Veteran exhaust pipe side	Casting Veteran exhaust pipe side investment cast in steel very good copy needs machining	£72.00
	Casting Veteran front Mudguard	Casting for Veteran front Mudguard cast SG iron	£22.00
	casting Veteran magneto platform	Veteran magneto platform casting part of the exhaust box 1 of 3 castings	£40.00
	Castings pedal eccentric	Eccentric castings for peadling gear unmachined	£25.00
	Celluloid handlebar grips 3.5" 7/8 bars	Celluloid handlebar grips 3.5" 7/8 bars 1 pair	£65.00
	Chain 1/2 x 1/8 for Magneto sold buy 300mm/ 1 foot	Chain timing 1/2 x 1/8 sold buy 300mm/ 1 foot SD/Ricardo/H 46 links need 2 feet needed SD/Ricardo Dyno 48 links 3 feet needed Model P 44 link 2 feet needed	£10.50
	Chain 1/2 x 3/16 pedal chain sold buy 300mm/ 1 foot	Chain 1/2 x 3/16. Used on pedalling Gear on veterans bikes sold buy the foot / 300mm ------- 3 feet need approximately please check	£13.50
	Chain Link 1/2 x 1/8	Chain Link 1/2 x 1/8 1 connector	£4.50
	Chain Link 1/2 x 1/8 - 1/2 link	Chain Link 1/2 x 1/8 - 1/2 link used when you need a odd number of rollers	£4.50
	Chain link 1/2 x 3/16	Chain link 1/2 x 3/16	£4.50
	Champion Spark Plug 6 COM	Champion Spark Plug 6 COM new old stock once their gone their gone I used one of these plug in 2018 on the cannonball run for 3500 mile and had no problem with them fouling they run better on unleaded then champion 7 as they are a bit hotter then a 7	£15.00
	Control lever single	Control lever single unplated used to Advance Magento	£120.00
	Control lever twin		£150.00
	Crank pin Veteran/H/SD	Crank Pins for 1910 -14 veteran plus Model H / Sd and some Ricardo not the pin for the double taper used in the early Ricardo's and early model H also will not fit or early H with the long 3/16 rollers you will need to give me your dimentions before hand	From: £65.00
	Early Veteran Fork Buttress Casting	Early Veteran Fork Buttress Casting made from SG iron ready to be machined.	£33.00
	Freewheel 22 teeth 1 5/8 thread	Freewheel 22 teeth 1 5/8 thread 24 tpi for 083 chain	£140.00

Page
« Prev |1|2|3|4|5|6|7|8| Next »