1909 Spares - Page 6

Home > 1909 Spares

Image	Name	Description	Price	Qty
	Oval Tubing 2 x 0.5m Rear Stand Tube	5/8 x 1 1/8 oval with 2mm wall thickness. This listing is for 2 of 0.5m lengths used for rear stands in most triumph motorbikes Due to length of the tube, postage is too high to regularly send 1m lengths, especially abroad. We will now sell by default the tubing already cut in two. If you wish to have an uncut 1m, please contact us and we can arrange additional postage	£20.00
	Pedals veterans early	Pedals veterans early. Made to order at the moment	£220.00
	Petrol Gauge tube 81mm long	Petrol Gauge tube 81mm approx 1/2 od x 5/16 id red line glass	£8.00
	Petrol Gauge tube 85mm long	Petrol Gauge tube 85mm approx long 1/2 od and 5/16 id red line	£8.00
	Piston rings 84 set x 6 (2)	Piston rings 84 set. 84mm x 6 x 3	£20.00
	Piston rings 84.5 x 6 (2)	Piston rings 84.5 set 84.5 x 6 x 3 set of 2	£20.00
	Rubber Foot pedals D type		£35.00
	Rubber for pedals veterans early type	Rubbers for pedals early veterans bikes 4 needed for each pedal. sold as one rubber each	£4.00
	Rubber Grips 7/8 bars 4 1/8" long		£35.00
	Spark plug Terminal	Spark plug Terminal made from Brass	£1.50
	Spark plug wire black	Spark plug wire black sold buy the meter	£5.00
	Spark plug wire red Braid		£6.00
	Spark plug wire yellow Braid	Spark plug wire yellow Braid sold buy the metre	£6.00
	Spring set of veteran carburettor 1 large 1small	Spring set of veteran carburettor 1 large 1small	£6.50
	Spring 1909 Brake Lever		£6.50
	Spring Brake Pedal Oiler Cover 3/4 ID	Spring Pedal Oiler Cover 3/4 ID	£4.00
	Spring for forks early one large one small	Spring for forks early one large one small	£90.00
	Spring Pedal Oiler Cover 9/16 ID	Spring Pedal Oiler Cover 9/16 ID	£4.00
	Sprocket 14 tooth engine timing sprocket veteran	Sprocket 14 tooth engine timing sprocket veteran	£35.00
	Sprocket Magneteo 14 tooth	Sprocket Magneto 14 tooth 1/2 x 1/8 pitch. Captive nut has pilot bore must be tapped to suit you magneto as their is a lot of different threads. Suit Veteran and H/SD etc with a Bosch ZE1 or variant with a 1 in 5 taper and around 0.520 on the large size of the taper.Once nut is machined pein over screw threads.	£70.00

Page
« Prev |1|2|3|4|5|6|7| Next »