Air filter (£35.00) Qty

Baby brake pedal spring (£5.25) Baby brake pedal spring Qty

Brake pivot bolt (£35.00) Brake pivot bolt with 7/16 x 4 1/2 long middle section then 3/8 thread on one end and 1/4 other end. Qty

Brammer belting 3/4 (£8.00) Price per foot Qty

Carrier nut (£2.00) Carrier nut 5/16 whit x 18 Tpi x 0.290 long x 440thou hex. also stem clamp nut. Qty

Carrier stud junior Carrier stud 5/16 one end 3/8 other end 0.525 hex Qty

Carrier washer (£1.00) Carrier washer special size to fit baby rear carrier 5/16 x 3/4 x 0.080 thick Qty

decompressor spring (£4.00) decompressor spring goes behind vavle in cylinder head Qty

Exhaust box casting (£.00) Exhaust box casting, ready to be machined from our own patterns. Qty

Foot brake nut 3/8 (£2.25) Shoulded nut 3/8-24tpi thread Qty

Foot rubbers one pair (£25.00) Foot rubbers one pair Qty

Footbrake nut 7/16 (£3.75) Footbrake nut 7/16 Qty

Fork pivot shoulded nut (£3.85) Nut that holds fork on to stem housing that pivots.5/16-24tpi thread. Qty

Fork spring oval wire (£119.00) Fork spring of oval wire section with both nut and draw bolt fitted. Heat treated and ready to plate.The expensive part was getting someone to roll the oval wire section. 4 1/4 long. Qty

Front brakes (£.00) Front brakes complete with tube clamps and handle bar cannon.Now made to order email ian@veterantriumph.co.uk Qty

Front hub (£00) Brand new cnc machined front hub 36 holes . Fits new modern bearings 32 x 9 x 15 mm bearings. Also we have complete hubs with spindle,bearings and dust covers ready to be nickled. Qty

Front hub complete (£.00) Complete hub with bearings, axels, dustcovers and wheelnuts. Qty

Handle bars early style (£40.00) Handle bars for early style baby triump veteran bend photo reference only. Qty

Handle Bars late (£40.00) Baby handle bars later bend photo reference only. Qty

Junior Gearbox bearing set (£210.00) Junior Gearbox bearing set, special made pair of bearings. Magneto type bearings 1 3/16 x 2 3/16 3/8 and 11/16 x 1 11/16 x 3/8. Qty

Junior Magneto cover Junior Magneto cover, aluminium hand made by us. Qty

Junior primary cover Junior primary cover, ready to machine to suit your studs centres. Cast from our paterns. Qty

Lower yoke bearing set (£40.00) Lower yoke bearing set, complete with 1/8 balls. Case hardened and ready to nickled. Qty

Mudguards (£45.00) Made to suit 24" wheels fits front or rear guards. Qty

Piston Baby piston are on their way due 2010 casting are avavible if you can machine them at £40.00 each Qty

Primary chain link (£3.00) Primary chain link to suit our chain. Qty

Rear hub 36 holes (£.00) Brand new cnc machined rear hub 36 holes . Fits new modern bearings 32 x 9 x 15 mm bearings.Also we have our complete hubs with spindle,bearings and dust covers ready to be nickled. Qty

Rear Hub complete (£.00) Complete hub with bearings, axels, dustcovers and wheelnuts. Qty

Rear stand stand castings set (£25.00) Rear stand stand castings set Qty

Seat bolt (£4.50) Seat bolt Baby 5/16 whit 4 1/8 long. Qty

seat bolt nut (£2.25) seat bolt nut 5/16 whit Qty

Seat washer 5/16 (£1.00) Seat washer 5/16 x 0.590 x 0.080 thou thick. For baby seat bolts and nut Qty

Spares manual Junior 1915 (£6.00) Spares manual Junior 1915. Copyed from our orginal. Qty

Stand pivot bolts 5/16 30-tpi x 3/4 (£5.85) Special bolt for rear stand that bolt in middle of the boss with 5/16 30 tpi thread Qty

Stem bolt and nut (£5.50) Stem bolt and nut 5/16 whit bolt Qty

Timing chain (£6.50) £6.50 per foot. Good quailty chain. Qty

Timing chain link (£2.25) Timing chain link. Qty

Top yoke bearing housing (£38.50) Top yoke bearing housing, for spring to clamp on and retair bearing in. Qty

Top yoke bearing set (£35.00) Top bearings set complete with 1/8 ball. Case hardened and ready to be nickled Qty

Twin lever (£120.00) Twin lever all newly made from steel no brass to bend like repro ones getting made. Made to suit 7/8 bar. Ready to nickel comes with clamp plate and 2 screws. Qty

Twin lever nickled (£160.00) Twin lever all newly made from steel no brass to bend like repro ones getting made. Made to suit 7/8 bar.Nickeled comes with clamp plate and 2 screws. Qty